Home / Guides / How To Install Lenovo A6000 Lollipop Stock Recovery

How To Install Lenovo A6000 Lollipop Stock Recovery

Lenovo A6000 Lollipop Stock Recovery

We have noticed that many of us are not able to update our Lenovo A6000 device using the OTA Update. Many of our blog visitors have complained that it is due to custom recovery and yes they were right it happens due to the custom recovery and a rooted device, the most common error while installing the OTA update for Lenovo A6000 is the Status 101 and then followed by Status 7. For Status 7 we do have a fix and most of us know about it, but this Status 101 error which pops up while updating our device was mostly unknown, but there is a fix for it. We need to install the Lenovo A6000 Lollipop Stock Recovery for installing the OTA update without any error. You just need to follow the guide which we’ve tried to make it as simple as possible so that you don’t get confused. You can do it in two ways and that is using a pc/laptop or without it using flashify app on your Lenovo A6000 Lollipop running device. But we would prefer using the pc/laptop if it is available with you because it is more convenient and sometimes without PC/laptop it is not successful to install recovery without it on your device.

DISCLAIMER : In no means we are responsible if you brick your phone or your SD card dies or your phone behaves abnormally. It is your sole and your own responsibility to root your phone. 

PRE-REQUIREMENTS :

  1. Battery charged above 50%
  2. Take the backup of your personal data
  3. Enable USB Debugging on your device
  4. Stock Recovery – Download it from here
  5. Setup ADB and Fastboot drivers on your PC from here.

HOW TO INSTALL LENOVO A6000 LOLLIPOP STOCK RECOVERY :

Step 1 : Extract the files which you downloaded.

Step 2 : Copy the recovery.img file to C:Program Files (x86)Minimal ADB and Fastboot or C:Program FilesMinimal ADB and Fastboot directory.

Step 3 : Open the C:Program Files (x86)Minimal ADB and Fastboot directory and press and hold shift key and right click anywhere inside the folder at the empty space and choose open command window here.

Step 4 : Turn off your device and then press Volume Down Button + Lock Button together for 2-5 seconds until you see the bootloader screen

Step 5 : Now connect the device to your PC/Laptop using USB Cable and then type the following in the ADB/Fasboot Command box and press enter

fastboot boot recovery.img

Once flashed type the following command to reboot Lenovo A6000.

fastboot reboot

Now you have successfully installed Lenovo A6000 Lollipop Stock Recovery. Now you can install the OTA update without any Status error 101 or Status error 7 on your Lenovo A6000.

2 comments

  1. Your links aren’t working. No link to adb drivers

  2. still not work is still say error status 101

Leave a Reply

Your email address will not be published. Required fields are marked *